Vrm100 Options - Motorola MCS 2000 User Manual

VRM100 Options

DCBE
Field Definitions
Disconnect On Data
Data On Failsoft
Speaker Unmute On Data
Transmit Enable Polarity
96
From the MAIN MENU, press F4, F3, F2 and then F5 to access this
screen.
MOTOROLA Radio Service Software
MCS Model:
...CONFIG:RADIO OPTIONS:VRM OPTIONS
Disconnect On Data................Disabled
Data On Failsoft...................Enabled
Speaker Unmute On Data............Disabled
Transmit Enable Polarity.......Active High
Channel Grant Polarity.........Active High
Data Mode Request Polarity......Active Low
MLU Operation.....................Disabled
Data Overrides Voice..............Disabled
Ignore Data Display...............Disabled
F1 F2 F3 F4
HELP
This screen can be accessed only when the VRM100 capable field is set to
Enabled on the RADIO WIDE OPTIONS screen (F4/F3/F2). This screen
allows you to define and modify VRM100 radio options. Press Tab to
select the desired field, or press the desired function key (F1 - F10).If a
field is highlighted, use the UP/DOWN arrow keys to select the desired
choice or value.
Use the UP/DOWN arrow keys to enable/disable this option. If this
field is enabled, the radio will send a disconnect tone at the end of data
transmission.
The default is Disabled.
Use the UP/DOWN arrow keys to enable/disable this option. If this
field is enabled, the radio will permit data transmit/receive on Failsoft.
The default is Enabled.
Use the UP/DOWN arrow keys to enable/disable this option. If this
feature is enabled, the speaker will unmute while data is being
received.
The default is Disabled.
Use the UP/DOWN arrow keys to select Active High or Active Low.
This value in this field determines the polarity of the output signal
TXE.
The default is Active High.
Use UP/DOWN Arrows to Select Choice.
VRM100 OPTIONS
--------------
F5 F6 F7 F8 F9 F10
EXIT