Get Codeplug Data From Archive File - Motorola MCS 2000 User Manual

Get Codeplug Data
From Archive File
CC
Programming Procedure
Function Key Descriptions
F2 - CHANGE ARCHIVE
F5 - DELETE SELECTED
F6 - CHDIR UP
F7 - CHDIR DOWN
F8 - GET ARCHIVE
From the MAIN MENU, press F3 twice to access this screen.
MOTOROLA Radio Service Software
MCS Model:
MAIN:GET/SAVE/PROG:GET FILE
Archive:C:\MRSS\MCS\ARCHIVE
A466ASNO.331
A467ASNO.361
A469ASNO.431
F1 F2 F3
HELP CHANGE
ARCHIVE
The GET ARCHIVE function is used to retrieve an archive file from a
disk. Once retrieved, the file may be modified using the CHANGE/
VIEW functions or programmed into a radio.
Note: Upper case names represent sub-directories and lower case
names represent file names.
1. Press Tab to select the serial number of the radio to be retrieved.
2. Press the F8 function key to retrieve the selected file.
Used to specify the directory path where the archive file will be
located. The default archive path will always be the default path
specified in the CONFIGURE PATHS AND PORT screen (F9/F3).
Allows you to delete the selected archive file. You will be prompted
before the file is deleted.
Used to move one level up the directory structure.
Used to move one level down the directory structure. Press Tab to
select a directory. The contents of the directory will be displayed.
Retrieves the highlighted archive file. The computer will read the radio
serial number and search the specified directory path for an archive file
corresponding to that serial number. Only the specified path will be
searched. Once the file is located, the computer will retrieve the file
and return you to the GET/SAVE/PROGRAM MENU.
Press Enter to Select File Name.
Press F8 to Load Codeplug File.
ARCHIVE FILES
-------------
F4 F5 F6 F7
DELETE CHDIR CHDIR
SELECTED UP DOWN
F8 F9 F10
GET EXIT
ARCHIVE
75