Motorola MCS 2000 User Manual page 38

Program Conventional
Personalities
32
Follow these steps to program conventional personalities:
1. From the MAIN MENU, press F4, F6 and then F3 to bring up the
CONVENTIONAL PERSONALITY screen.
2. Press F2 and then F3 as many times as necessary to add the desired
number of personalities. When you are done, press F4 to return to
Personality 1.
3. Press Tab to advance to the Scan List field. Use the UP/DOWN
arrow keys to select "1".
4. Press Tab to access the Phone Operation field. Use the UP/DOWN
arrow keys to scroll for choices and select None, Unlimited or List
Only.
5. Press Tab as many times as necessary until the Rx Frequency field
is highlighted. Enter frequency data directly or use the UP/DOWN
arrow keys to scroll through available choices.
6. Press Tab to go to the Rx Squelch Type field. Use the UP/DOWN
arrow keys to select PL, DPL or CSQ.
7. Press Tab to advance the prompt to the Code field. Use the UP/
DOWN arrow keys to scroll for choices, or enter the code directly.
8. Press Tab to advance the prompt to the Tx Frequency field. Enter
frequency data directly or use the UP/DOWN arrow keys to select
the desired frequency.
9. Press Tab to advance the prompt to the Tx Squelch Type field. Use
the UP/DOWN arrow keys to select PL or DPL.
10. Press F4 to advance to the next personality.
Repeat steps 3 through 10 for additional personalities as necessary.
11. Press F10 twice to return to the CHANGE/VIEW MENU.