Save Codeplug Data To An Archive File - Motorola MCS 2000 User Manual

Save Codeplug
Data to an Archive
File
CG
Function Key Descriptions
F2 - CHANGE ARCHIVE
F8 - SAVE ARCHIVE
80
From the MAIN MENU, press F3 and then F7 to access this screen.
MOTOROLA Radio Service Software
MCS Model:
..GET/SAVE/PROG:CLONE RADIO:SAVE FILE
Archive:
SAVE CODEPLUG DATA TO ARCHIVE FILE
----------------------------------
Archive Filename......A466ASNO.331
Model Number..........M01KHH9PW5AN
Serial Number.....................
Last Programmed.........9510021641
Program Source.................RSS
F1 F2 F3
HELP CHANGE
ARCHIVE
The SAVE ARCHIVE function is used to create (or update) an archive
copy of the codeplug information on a disk.
Note: You are strongly encouraged to make an archive copy of
every radio installed or serviced. You will then be able to quickly
restore customer information in case of codeplug failure.
Used to specify the directory path where the archive file is to be
located. The default archive path will always be the default path
specified in the CONFIGURE PATHS AND PORT screen (F9/F3).
Saves the archive file to the path specified (or to the default path if no
path is specified). Do NOT press F8 until you have entered the archive file
name and customer identification information.
Enter Archive Path.
F4 F5 F6 F7 F8 F9 F10
SAVE EXIT
ARCHIVE