Dtmf Access/Deaccess Codes - Motorola MCS 2000 User Manual

DTMF Access/
Deaccess Codes
DCDH
Function Key Definitions
F2 - ADD CODE
F5 - DELETE CODE
120
At the MAIN MENU, press F4, F3, F4 and then F8 to access this screen.
MOTOROLA Radio Service Software
MCS Model:
MAIN:CHANGE/VIEW:CONFIG:PHONE:CODES
Num
---
1
F1 F2 F3
HELP ADD
CODE
This screen allows the user to define Access/Deaccess Code pairs used
for DTMF phone option. The Access Code is used to keep unauthorized
users from using the interconnect system on the repeater. The
Deaccess Code is used to inform the system about the end of a call and
thus minimize wasted air time. The valid symbols are 0 (zero) through
9, "*", "#" and "P" (for pause).
Note: These codes can be selected in the Auto Access Code field
on the PHONE OPTIONS screen (F4/F3/F4/F9). Up to 19 code
pairs may be defined.
Press Tab to select the desired field, or press the desired function key
(F1 - F10). If a field is highlighted, enter the Access or Deaccess Code
directly.
Adds another Access/Deaccess Code pair.
Deletes the highlighted Access/Deaccess Code pair from the list. You
will be prompted before the code pair is actually deleted.
Enter Code.

DTMF ACCESS/DEACCESS CODES

--------------------------
Access Code Deaccess Code
----------- -------------
*1P# *1P#
F4 F5 F6 F7
DELETE
CODE
F8 F9 F10
EXIT