Assembling The Hardware; Steps To Connect The Hardware - Motorola MCS 2000 User Manual

Assembling The
Hardware
RIB Power Supply
60-82728J01 (9Vac) Power Supply
01-80357A57 (110 Vac) Power Supply
or 01-80358A56 (220 Vac) Power Supply.
It is more reliable to use the power supply
than to use a weak battery.
Smart RIB Power Supply
01-80302E27 or later (120 Vac) Power
Supply (Required for FLASHport operation
only.)
Computer
A
Radio Interface Box (RIB)-to-Computer Cable
30-80369B72 Cable for IBM Personal
Computer AT or compatible computer
(9-pin end and a 15-pin end).
or 30-80369B71 Cable for computers requiring
a 25-pin serial port connection
(25-pin end and a 15-pin end).
or Smart Radio Interface Box (SRIB) to
Computer Cable 30-80390B48 or later
cable (Required for FLASHport operation only.)
Steps to Connect the
Hardware
4
The figure below shows how to assemble the required (and optional)
equipment used to program the MCS 2000 radio.
Portable Products Test Set -
P/N RTX4005B or
RTX-4005A Test Set (with
rework kit RPX-4665A)
Provides the capability for
testing many transmitter and
receiver functions.
Transmitter modulation and
keying can be simulated and
receiver parameters can be
tested without opening up
the radio. The Test Set is used
in conjunction with the
programming/test cable.
RIB
B
Radio Interface Box (RIB)
RLN4008B RIB
or Smart Radio Interface Box (RIB) RLN1015B or
later RIB (Required for FLASHport operation only.)
For laptop computer and on-the-road use only; use
a 9V battery (not included).
!
Caution
1. Connect the RIB-to-computer cable to the communications port of
the computer (9/25-pin end).
2. Connect the other end (15-pin end) to the Radio Interface Box
(RIB).
Note: If your computer has a 25-pin connections port
connector, you will need the cable 30-80369B71 to insert
between the computer and the RIB-to-computer cable.
3. Connect the 25-pin end of the RIB-to-radio cable to the RIB, and
the 9-pin end to the connector on the front side of the radio as
RIB-to-Radio Cable
58-80385B31 Cable
RKN4062A
Smart RIB-to-Radio Cable
RKN4047A Cable (required for
FLASHport on Mobile radios only)
Z
Z
Srch Emer Scan Phon
MCS 2000 Mobile
Use a fresh, 9V battery. The LED will remain lit
with a weak battery and this may cause certain
errors on the screen.
H/L Home
Call Dim Menu
Sel Mon