Figure; Igure Routing The Cables Through The Access Cutout - Canon imagePRESS A3200 Installation And Service Manual

S
ERVICING A
R
EPLACING THE IMAGE
1. Make sure that the left side panel is removed from the imagePRESS Server.
2. Place the imagePRESS Server upright on the furniture stand. Slide the imagePRESS Server
forward just until its front panel is aligned with the back edge of the table top.
Use the handle on the stability bracket to lift the rear of the imagePRESS Server and slide it
forward.
3. Feed the monitor cables (power and video) into the access cutout in the back of the
imagePRESS Server. Pull each cable out of the top of the imagePRESS Server.
Power cable
Video cable
Top cutout
Back cutout
F
IGURE
S F
YSTEM WITH URNITURE
PRESS S
ERVER IN THE FURNITURE
Routing the cables through the access cutout
7:
182