Inspecting The System - Canon imagePRESS A3200 Installation And Service Manual

For the canon imagepress c7010vp/c7000vp/c6010vp/c6000vp/c6010/c6000
Table of Contents

Advertisement

Conditions to verify
When the problem occurs, verify the following:
• Power cable is connected properly to the imagePRESS Server and
to the power outlet.
• The imagePRESS Server is powered on.
• Chassis fans are operating.
• At least one LED on the network connector is lit.
• All external cables required are present, in correct connectors, well-seated.
• Cables, cable connectors, and mating connectors appear undamaged.
If the problem occurs at power up or reboot, verify the following:
• Control Panel LCD lights up and logo displays.
• DVD drive is present and no media is in the drive.
• DVD drive accepts inserted media.
• No error messages or system hangs occur on the Control Panel before Idle.
T
ROUBLESHOOTING

Inspecting the system

If checking cable and board connections does not fix the problem, consider inspecting the
system component by component (see
is properly installed and configured before you decide to replace costly components.
If a component in the system you are servicing does not meet a condition listed in
it is not clear how to fix the problem (for example, if the system hangs before reaching Idle),
locate the behavior in
Table 6 on page 149
problem.
T
5:
Verifying the system
ABLE
Table
5) and verifying that each hardware component
to see the suggested action(s) for solving the
Part and additional page references
Back panel external connectors, chassis fans, and
power connector,
page 141
DVD drive,
page 128
143
Table 5
and

Advertisement

Table of Contents
loading

Table of Contents