Hardware And Software Requirements; Webview Livescope Viewer Software; Webview Livescope Mv Monitoring Station Software Version 1.0 (Optional); Compatible Cameras (Optional) - Canon VB101 User Manual

Network camera server
Hide thumbs Also See for VB101:
Table of Contents

Advertisement

Hardware and Software Requirements

Webview Livescope Viewer Software

Java Viewer version 3.10
PC
IBM PC/AT compatible
Operating System
Windows 95/98 or Windows NT 4.0 (IE 4.0 or later required)/Windows 2000
Netscape Navigator/Communicator 4.5 or later,
Web Browser
or Microsoft Internet Explorer 4.01 or later required
* This viewer is installed on the VB101 and is automatically downloaded by the client at access.
* This software may not run stably on operating systems other than those listed above.
Helper Viewer version 3.10
PC
IBM PC/AT compatible
Operating System
Windows 95/98 or Windows NT 4.0 (IE 4.0 or later required)/Windows 2000
Netscape Navigator/Communicator 4.5 or later,
Web Browser
or Microsoft Internet Explorer 4.01 or later required
* This software must be installed beforehand.
* It can be installed free of charge from the CD-ROM for the VB101, or the following Web site.
URL: http://www.x-zone.canon.co.jp/WebView-E/download/dload.htm
c
The helper viewer or plug-in viewer for Webview Livescope version 1.21, 2.01
and 3.0 can also be used, but some of the functions differ.
Note
On Macintosh computers, some of the functions of the helper viewer for
Webview Livescope version 1.20 are not available.

Webview Livescope MV Monitoring Station Software version 1.0 (optional)

IBM PC/AT compatible device
Computer
CPU: Pentium II 266 MHz or better, RAM: 64 Mbytes or better, Hard disk capacity: 300 Mbytes or better
OS
Windows 95/98 or Windows NT 4.0/Windows 2000
Web Browser
Microsoft Internet Explorer 5 or later required
16

Compatible Cameras (optional)

Canon Communication Camera
Canon Communication Camera
VC-C4/VC-C4R
VC-C4R
(NTSC)
(NTSC)
The wide converter WL-37 (for the VC-C4) and the wide converter WD-37 (for the VC-C3) are
available as optional accessories.
e
While other cameras can be used, the camera control functions will not be
available. Only the video functions can be used.
Tip

Compatible Networks

• 10 Base-T/100 Base-TX Ethernet (auto negotiation)
• Public switched telephone networks (Use a recommended modem card)

Compatible PCMCIA Cards

Use a recommended PCMCIA card. For further information, contact your Canon dealer.

Compatible Cables (optional)

RS-232C cables for camera control and video cables are available as optional accessories in
lengths other than the ones provided. For further information, contact your Canon dealer.
Hardware and Software Requirements
Canon Communication Camera
VC-C3
1
(NTSC/PAL)
17

Advertisement

Table of Contents
loading

Table of Contents