Table of Contents
Advertisement
S
ERVICE
Switch bank assembly
The switch bank assembly attaches to the component sled in the front of the chassis.
The switch bank assembly includes the following components:
• DVD drive
• Power button and power button cable
• Reset button and reset button cable
• Speaker and speaker cable
• Front USB ports and front USB cables
For information about servicing the DVD drive, see
N
:
OTE
T
O REMOVE THE SWITCH BANK ASSEMBLY
1. Shut down the imagePRESS Server, remove all cables from the back, and then open the
system
(see
page
In order to remove the switch bank assembly, you must remove the left, right, and front
panels.
2. Detach the following cables:
• Data/power cable from the back of the DVD drive
• Power and reset button cables from the motherboard
• Speaker cable from the motherboard
• Front USB port cables from the motherboard
3. Remove the ferrite that is installed on the front USB port cables near the motherboard.
Carefully pry open the latch on the side of the ferrite, and remove the ferrite from the cables.
Set aside the ferrite so that you can replace it later.
P
ROCEDURES
59).
page
128.
124
Advertisement
Table of Contents
