Table of Contents
Advertisement
S
ERVICE
Hard disk drives
The factory-installed HDDs (hard disk drives) are formatted and loaded with system
software, network drivers, and printer fonts. The HDDs are also used to store spooled print
jobs.
If you replace a HDD with a new one, you must reinstall system software and user software
on the system. (Replacement HDDs are not shipped with preinstalled software.)
The imagePRESS Server remains enabled for features such as SeeQuence Suite and the
Fiery Graphic Arts Package, once the software is reinstalled.
This section includes separate procedures for replacing a HDD installed inside the
imagePRESS Server and for replacing a HDD installed inside the Enclosure of the HDD
Security Option.
Proper handling
Improper handling can damage the HDD. Handle the HDD with extreme care.
• Use proper ESD practices when grounding yourself and the imagePRESS Server.
• Keep magnets and magnetic-sensitive objects away from the HDDs.
• Do not remove the screws on top of the HDDs. Loosening these screws voids
the warranty.
• Never drop, jar, bump, or put pressure on the HDDs.
• Handle the HDDs by the sides and avoid touching the printed circuit boards.
• Allow the HDDs to reach room temperature before installation.
HDD problems may be caused by the following:
• Loose or faulty connection
• Faulty hard disk drive
If you are replacing a HDD with a new one, you must have the following:
• The appropriate system software and documentation for the imagePRESS Server you
are servicing
• A compatible version of the user software for the networked computers that will be
printing to the imagePRESS Server
P
ROCEDURES
118
Advertisement
Table of Contents
