Table of Contents
Advertisement
Control Panel
Enabling options.
Please wait..
Do not shut down or
reset server or
remove dongle.
Options
OK
transferred
successfully.
Enable Option(s)
Server Info
Dongle Info
Enable option(s)
Exit & Reboot
Main Menu
Select Server Info to verify the transferred option(s).
For more about viewing Server Info, see
OK
Select OK and
wait for CD to
eject.
S
P
ERVICE
ROCEDURES
Action
Allow the transfer process
to continue without
interruption (approximately
two minutes).
Select OK to continue.
Select Exit & Reboot to
continue.
page
93.
Select OK to eject the CD
and reboot the system.
After you select OK, the message "Please standby...System restarting..." displays. Allow the
system to restart without interruption. The Fiery Options Utility DVD is ejected
automatically.
6. Remove the Fiery Options Utility DVD and the one-time use dongle.
The new motherboard is now customized and cannot be used in another system.
7. When the Log On to Windows dialog box appears on the monitor, type Administrator in the
user name field, type Fiery.1 in the password field, and then press Enter on the keyboard.
Type Fiery.1 exactly as shown. The password is case-sensitive; for example,
N
:
OTE
fiery.1
will not work.
Monitor
Fiery Options Utility
Successfully enabled:
Options transferred successfully
to new motherboard.
Fiery Options Utility
New Motherboard
No uses remaining
Transfers options to the new motherboard.
IMPORTANT
Before proceeding, make sure that you have:
Installed the new motherboard
Verified operation in Service Mode
View Server Information
Select View Server Information to verify the transferred option(s).
For more about viewing Server Information, see
Fiery Options Utility
Click OK and wait for CD to eject.
OK
Action
Select Back to continue.
Back
Select Exit to continue.
Exit
page
93.
Select OK to eject the CD
and reboot the system.
92
Advertisement
Table of Contents
