Figure 18: Removing/Replacing The Left Or Right Panel - Canon imagePRESS A3200 Installation And Service Manual

S
ERVICE
T
O REMOVE AND REPLACE THE LEFT OR RIGHT PANEL
1. Remove the three screws that secure the panel to the back of the chassis (see
Set aside the screws so that you can replace them later.
2. Pull the back edge of the panel away from the chassis and lift the panel off the chassis.
Pivot
F 18:
IGURE
3. To replace the panel, fit the front edge of the panel around the pivot in the chassis
(see Figure
4. Swing the back edge of the panel closed against the chassis and replace the three screws that
you removed earlier.
Be careful not to damage any cables when replacing the panel. Fold all cables inside the chassis
before swinging the panel closed.
P
ROCEDURES
Removing/replacing the left or right panel
18).
Figure
Screw (1 of 3)
62
18).