I
NSTALLATION
Power
❑
Verify that there is a dedicated 15Amp grounded electrical outlet near the copier for the
imagePRESS Server.
Do not run the imagePRESS Server and the copier on the same circuit.
• Do not use a 3-prong adapter in a 2-hole ungrounded outlet.
• Do not plug the imagePRESS Server into a circuit with heating or refrigeration equipment
(including water coolers).
• Do not plug the imagePRESS Server into a switchable wall outlet. This can result in the
imagePRESS Server being turned off accidentally.
Network
❑
Make sure that the network will be available at the time set for installation.
❑
Verify with the network administrator that the network is functioning before you attach the
imagePRESS Server.
❑
Make sure that the configuration requirements specified in Configuration and Setup on the
User Documentation CD have been met for the remote computers and the network.
30