S
P
ERVICE
ROCEDURES
Back fan
The following procedures describe how to remove and replace the back fan.
T
O REMOVE THE BACK FAN
1. Shut down the imagePRESS Server, remove all cables from the back, and then open the
system
(see
page
59).
In order to access the fan, you must remove the left panel.
2. Detach the 3-pin fan cable connector from its connector on the motherboard.
3. Remove the four plastic rivets that attach the fan to the chassis, and then remove the fan.
To remove a rivet, use a flathead screwdriver to pry loose the rivet head while squeezing and
pushing the locking end of the rivet with your fingers or a screwdriver.
F
39:
Removing/replacing the back fan
IGURE
111
Back fan
Rivet (1 of 4)