Figure 45: Removing/Replacing The Component Sled - Canon imagePRESS A3200 Installation And Service Manual

S P 125
ERVICE ROCEDURES
4. Remove the component sled from the chassis (see Figure 45).
Press the latches on the sides of the component sled and carefully pull the sled out of its slot in
the front of the chassis.
Be careful not to damage the EMI gasket lining the slot in the chassis. Guide the cables
N :
OTE
out of the chassis as you remove the component sled to prevent them from catching or
tangling on internal parts.
Slot with gasket lining
Component sled
F 45: Removing/replacing the component sled
IGURE