Table of Contents
Advertisement
I
27
NSTALLATION
I
NSTALLATION
This chapter includes the following information:
• Checking the customer site
• Unpacking the imagePRESS Server
• Installing the imagePRESS Server
• Connecting the imagePRESS Server cables
• Starting the imagePRESS Server for the first time
• Completing the installation
Installation sequence
Familiarize yourself with this chapter before you attempt an installation. The installation
sequence described in this chapter is designed to make your job as easy as possible. Installation
problems are easier to avoid and diagnose if you proceed from the component to the system
level and verify functionality at each stage.
Figure 3 on page 28
outlines the recommended
installation procedure for connecting the imagePRESS Server to the copier.
Because the imagePRESS Server is a node on the customer's computer network, make
sure that you coordinate your scheduled installation with the network administrator at
the customer site. For Network Setup information, refer the network administrator to
Configuration and Setup on the User Documentation CD.
You can change the default language preinstalled at the factory using the Configure
N
:
OTE
tool available through Command WorkStation and WebTools. Launch Configure, specify
the language that you want to display on the imagePRESS Server from Server > General >
Choose Server Language, and then click Apply.
Advertisement
Table of Contents
