Table of Contents
Advertisement
S
P
ERVICE
ROCEDURES
T
O REPLACE THE MOTHERBOARD TRAY
This procedure assumes that you have installed the motherboard in the motherboard
N
:
OTE
tray, as described on
1. Carefully insert the motherboard tray into the chassis.
Move all cables aside as you insert the motherboard tray; make sure that the tray is not
pinching or covering any cables in the chassis.
2. Place the tray flat in the chassis, fitting the cutouts at the top of the tray over the two
standoffs in the chassis (see
the connector plate engages the back panel.
F
29:
Installing the motherboard tray
IGURE
3. Replace the two thumb screws that secure the tray to the chassis (see
4. Replace the two screws that secure the connector plate to the back panel of the chassis
(see
Figure 27 on page
5. Replace the front fan (see
6. Replace the back fan (see
You are now ready to replace motherboard components to complete motherboard hardware
installation.
page
84.
Figure
29). Slide the tray toward the back of the chassis until
Fit cutouts over
standoffs and slide
tray toward back.
80).
page
108).
page
111).
85
Figure 27 on page
80).
Advertisement
Table of Contents
