Table of Contents
Advertisement
S
P
ERVICE
ROCEDURES
6. If you are replacing the old HDD with a new HDD, remove the four screws that attach the old
HDD to its bracket, and remove the HDD (see
Set the screws aside so you can replace them later.
Make sure to support the HDD as you remove the screws. Do not loosen or remove the
screws on the HDD covers. Loosening or removing these screws will break the seal and void
the HDD warranty.
Do not touch the drives with magnetic objects (such as magnetic screwdrivers), and avoid
placing items, such as credit cards and employee ID cards that are sensitive to magnets, near
the HDDs.
7. Place the HDD in an antistatic bag.
Removing/replacing the HDD bracket
F
44:
IGURE
Replacement HDDs are not shipped with preinstalled system software. After installing a
HDD, you must install the appropriate system software.
Figure
44).
HDD
HDD bracket
Screw (1 of 4)
121
Advertisement
Table of Contents
