Configuring Dynamic Address Allocation For An Extended Address Pool - HP 10500 Series Configuration Manual

Step
5. Specify the address lease
duration.
6. Return to system view.
7. Exclude IP addresses from
automatic allocation.
Configuring dynamic address allocation for an extended
address pool
Extended address pools support dynamic address allocation only.
When you configure an extended address pool, specify:
Assignable IP address range
•
Mask
•
After the assignable IP address range and the mask are specified, the address pool becomes valid.
To configure dynamic address allocation for an extended address pool:
Step
1. Enter system view.
2. Enter extended address pool
view.
3. Specify
range.
4. Specify the IP address mask.
5. Specify the IP address range
for the DHCP clients of a
specific vendor.
6. Specify the address lease
duration.
7. Exclude IP addresses from
dynamic allocation.
Excluded IP addresses specified with the forbidden-ip command in DHCP address pool view are not
assignable in the current extended address pool, but are assignable in other address pools.
Command
expired { day day [ hour hour
[ minute minute ] [ second
second ] ] | unlimited }
quit
dhcp server forbidden-ip
low-ip-address [ high-ip-address ]
Command
system-view
dhcp server ip-pool pool-name
extended
the IP address
network ip range min-address
max-address
network mask mask
vendor-class-identifier
hex-string&<1-255> ip range
min-address max-address
expired { day day [ hour hour
[ minute minute [ second second ] ] ]
| unlimited }
forbidden-ip ip-address&<1-8>
41
Remarks
Optional.
One day by default.
N/A
Optional.
Except IP addresses of the DHCP
server interfaces, all addresses in
the DHCP address pool are
assignable by default.
Remarks
N/A
N/A
Not specified by default.
Not specified by default.
Optional.
Not configured by default.
Optional.
One day by default.
Optional.
Except IP addresses of the DHCP
server interfaces, all addresses in
the DHCP address pool are
assignable by default.