Disabling A Port From Generating Link Up/Down Logging Information - HP A3100-8 v2 EI Configuration Manual

Follow these steps to enable synchronous information output:
To do...
Enter system view
Enable synchronous information
output
NOTE:
If system information, such as log information, is output before you input any information under the
•
current command line prompt, the system will not display the command line prompt after the system
information output.
If system information is output when you are inputting some interactive information (non Y/N
•
confirmation information), after the system information output, the system will not display the command
line prompt but your previous input in a new line.
Disabling a port from generating link up/down logging
information
By default, all the ports of the device generate link up/down logging information when the port state
changes. You may need to use this function in some cases. For example:
You are only concerned with the states of some of the ports, use this function to disable the other
•
ports from generating link up/down logging information.
If the state of a port is not stable and redundant logging information will be generated, use this
•
function to disable the port from generating link up/down logging information.
Follow these steps to disable a port from generating link up/down logging information:
To do...
Enter system view
Enter interface view
Disable the port from generating
link up/down logging information
NOTE:
With this feature applied to a port, when the state of the port changes, the system does not generate port
link up/down logging information, and you cannot monitor the port state changes conveniently. HP
recommends that you use the default configuration in normal cases.
Use the command...
system-view
info-center synchronous
Use the command...
system-view
interface interface-type
interface-number
undo enable log updown
169
Remarks
—
Required
Disabled by default
Remarks
—
—
Required
By default, all ports are allowed to
generate link up/down logging
information when the port state
changes.