Figure 2-1 Change Password Screen; Resetting The Contivity 221 - Nortel Contivity 221 User Manual

Hide thumbs Also See for Contivity 221:

Table of Contents

2-2 Introducing the WebGUI

Figure 2-1 Change Password Screen

You should now see the MAIN MENU screen (see Figure 2-3).

The management session automatically times out when the time period set in the

Administrator Inactivity Timer field expires (default five minutes). Simply log back

If you forget your password or cannot access the SMT menu, you will need to reload the factory-

default configuration file or use the RESET button the back of the Contivity 221. Uploading this

configuration file replaces the current configuration file with the factory-default configuration file.

This means that you will lose all configurations that you had previously and the speed of the

console port will be reset to the default of 9600bps with 8 data bit, no parity, one stop bit and flow

control set to none. The password will be reset to "setup", also.

Procedure To Use The Reset Button

Press the RESET button for ten seconds, and then release it. The Contivity 221 restarts.

Otherwise, go to step 2.

Turn the Contivity 221 off.

While pressing the RESET button, turn the Contivity 221 on.

317517-A Rev 00

into the Contivity 221 if this happens to you.