Table of Contents
Advertisement
Figure 25-14 NAT Example 3
In this case you need to configure Address Mapping Set 1 from Menu 15.1 - Address
Step 1.
Mapping Sets. Therefore you must choose the Full Feature option from the Network
Address Translation field (in menu 4 or menu 11.3) in
Step 2.
Then enter 15 from the main menu.
Enter 1 to configure the Address Mapping Sets.
Step 3.
Enter 1 to begin configuring this new set. Enter a Set Name, choose the Edit Action
Step 4.
and then enter 1 for the Select Rule field. Press [ENTER] to confirm.
Select Type as One-to-One (direct mapping for packets going both ways), and enter
Step 5.
the local Start IP as 192.168.1.10 (the IP address of FTP Server 1), the global Start IP
as 10.132.50.1 (our first IGA). (See
Repeat the previous step for rules 2 to 4 as outlined above.
Step 6.
When finished, menu 15.1.1 should look like as shown in
Step 7.
Figure
25-15.
Figure
25-16).
Figure
Contivity 221 VPN Switch User's Guide
NAT 25-15
25-17.
Formatted: Font: Italic
Formatted: Font: Italic, D
check spelling or grammar
Deleted: Figure 25-15
Formatted: Font: Italic
Deleted: Figure 25-16
Formatted: Font: Italic
Formatted: Font: Italic, D
check spelling or grammar
Formatted: Font: Italic
Formatted: Font: Italic
Formatted: Font: Italic, D
check spelling or grammar
Formatted: Font: Italic
Deleted: Figure 25-17
Advertisement
Table of Contents
