Table of Contents
Advertisement
Table 13-2 Summary
LABEL
Disconnect
Drop the Contivity VPN connection.
This displays when the total number of the VPN rules' IP policies is more than ten.
There can be a total of five VPN rules. The VPN rules can have a combined total of total
of 60 IP policies.
Go to Page
Each page can display up to ten IP policies. Therefore, it may take more than one page
to display one VPN rule's IP policies. Each page always displays all of the configured
VPN rules, although the rule's IP policies may not all display. You may need to select
another page number from this Go to Page drop-down list box to view other IP policies.
#
This is the VPN rule index number.
This field displays whether the VPN rule is active or not. A Yes signifies that this VPN rule
Active
is active. No signifies that this VPN rule is not active.
This field displays private, local and remote IP addresses when you configure the VPN
rule's IP policy to use branch tunnel NAT address mapping.
Private /Local
/ Remote
This field displays only local and remote IP addresses when you configure the VPN rule's
Policy IP
policy to not use branch tunnel NAT address mapping.
Address
See the following descriptions for more details about the private, local and remote IP
addresses.
The Private Policy IP Address or Local Policy IP Address field displays the IP address
(or range of IP addresses) of the computer (or computers) on your Contivity 221's local
network, for which you have configured this VPN rule IP policy.
A Private Policy IP Address displays in blue, this applies when you configure the IP
policy to use branch tunnel NAT address mapping.
Private Policy
The Private Policy IP Address field displays a single (static) IP address when
IP Address
the IP policy's Branch Tunnel NAT Address Mapping Rule Type field is
configured to One-to-One in the IP Policy screen.
The Private Policy IP Address field displays the beginning and ending (static) IP
addresses of a range of computers when the IP policy's Branch Tunnel NAT
Address Mapping Rule Type field is configured to Many One-to-one or Many-
to-One in the IP Policy screen.
DESCRIPTION
Contivity 221 VPN Switch User's Guide
VPN Screens 13-5
Advertisement
Table of Contents
