Table of Contents
Advertisement
Table 17-2 System Status: Show Statistics
LABEL
Port
This is the WAN or LAN port.
Status
This displays the port speed and duplex setting if you're using Ethernet encapsulation
and down (line is down), idle (line (ppp) idle), dial (starting to trigger a call) and drop
(dropping a call) if you're using PPPoE encapsulation.
TxPkts
This is the number of transmitted packets on this port.
RxPkts
This is the number of received packets on this port.
Collisions
This is the number of collisions on this port.
Tx B/s
This displays the transmission speed in bytes per second on this port.
Rx B/s
This displays the reception speed in bytes per second on this port.
Up Time
This is the total amount of time the line has been up.
System Up Time This is the total time the Contivity 221 has been on.
Poll Interval(s)
Enter the time interval for refreshing statistics in this field.
Set Interval
Click this button to apply the new poll interval you entered in the Poll Interval(s) field.
Stop
Click Stop to stop refreshing statistics, click Stop.
DHCP Table Screen
17.3
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients
to obtain TCP/IP configuration at start-up from a server. You can configure the Contivity 221 as a
DHCP server or disable it. When configured as a server, the Contivity 221 provides the TCP/IP
configuration for the clients. If set to None, DHCP service will be disabled and you must have
another DHCP server on your LAN, or else the computer must be manually configured.
Click MAINTENANCE, and then the DHCP Table tab. Read-only information here relates to
your DHCP status. The DHCP table shows current DHCP Client information (including IP
Address, Host Name and MAC Address) of all network clients using the DHCP server.
DESCRIPTION
Contivity 221 VPN Switch User's Guide
Maintenance 17-3
Advertisement
Table of Contents
