Table of Contents
Advertisement
Chart I-4
IP Commands
tredir
failcount
partner
target
timeout
checktime
active
save
disp
debug
igmp
debug
forwardall
querier
iface
COMMAND
<count>
<ipaddr>
<ipaddr>
<timeout>
<period>
<on|off>
<value>
[level]
[on|off]
[on|off]
<iface> grouptm
<timeout>
<iface> interval
<interval>
<iface> join
<group>
Command Interpreter I-13
DESCRIPTION
Sets the number of times that the device
may ping the target without a response
before forwarding traffic to the backup
gateway.
Sets the traffic redirect backup gateway
IP address.
Sets the IP address that the device uses
to test WAN accessibility.
Sets the number of seconds the device
waits for a response from the target.
Sets the number of seconds the device
waits between attempts to connect to
the target.
Enables/disables traffic redirect.
Saves traffic redirect configuration.
Displays the traffic redirect configuration.
Sets the traffic redirect debug value.
Sets IGMP debug level.
Activates/deactivates IGMP forwarding
to all interfaces flag.
Turns on/off IGMP stop query flag.
Sets IGMP group timeout for the
specified interface.
Sets IGMP query interval for the
specified interface.
Adds an interface to a group.
Contivity 221 VPN Switch User's Guide
Advertisement
Table of Contents
