Table of Contents
Advertisement
Chart I-1
Sys Commands
roadrunn
er
debug
display
restart
ddns
debug
display
restart
logout
cpu
display
upnp
active
config
display
firewall
load
reserve
save
COMMAND
<level>
<iface name>
<iface name>
[0:no/1:yes]
[0:deny/1:permit]
[0:deny/1:pass]
[0:deny/1:permit]
Command Interpreter I-7
DESCRIPTION
Enables/disables roadrunner
service.
0: disable (default)
1: enable
Displays roadrunner information
iface-name: enif0, wanif0
Restarts roadrunner.
Turns on/off the displaying of DDNS
debug messages.
Displays DDNS information.
Restarts DDNS.
This command has no effect.
Displays the CPU's utilization.
Activates or deactivates the saved
UPnP settings.
Allow users to make configuration
changes through UPnP.
Displays UPnP information.
Allow UPnP to pass through
Firewall.
Saves UPnP information.
Saves UPnP information.
Contivity 221 VPN Switch User's Guide
Advertisement
Table of Contents
