Table of Contents
Advertisement
21-6 LAN Setup
Figure 21-5 Menu 3.2.1: IP Alias Setup
Menu 3.2.1 - IP Alias Setup
IP Alias 1= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
IP Alias 2= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
Enter here to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.
Use the instructions in the following table to configure IP Alias parameters.
Table 21-3 IP Alias Setup Menu Fields
FIELD
IP Alias
Choose Yes to configure the LAN network for the Contivity 221.
IP Address
Enter the IP address of your Contivity 221 in dotted decimal
notation.
IP Subnet Mask
Your Contivity 221 will automatically calculate the subnet mask
based on the IP address that you assign. Unless you are
implementing subnetting, use the subnet mask computed by the
Contivity 221.
RIP Direction
Press [SPACE BAR] and then [ENTER] to select the RIP
direction. Options are
Both, In Only, Out Only or None.
Version
Press [SPACE BAR] and then [ENTER] to select the RIP version.
Options are
RIP-1, RIP-2B or RIP-2M.
Incoming
Enter the filter set(s) you wish to apply to the incoming traffic
Protocol Filters
between this node and the Contivity 221.
317517-A Rev 00
DESCRIPTION
EXAMPLE
Yes
192.168.1.1
255.255.255.0
None
RIP-1
1
Advertisement
Table of Contents
