Table of Contents
Advertisement
30-10 Firmware and Configuration File Maintenance
Step 7.
Use "put" to transfer files from the Contivity 221 to the computer, for example, "put
config.rom rom-0" transfers the configuration file "config.rom" on your computer to
the Contivity 221. See earlier in this chapter for more information on filename
conventions.
Step 8.
Enter "quit" to exit the ftp prompt. The Contivity 221 will automatically restart after a
successful restore process.
30.2.11
Restore Using FTP Session Example
Figure 30-8 Restore Using FTP Session Example
ftp> put config.rom rom-0
200 Port command okay
150 Opening data connection for STOR rom-0
226 File received OK
221 Goodbye for writing flash
ftp: 16384 bytes sent in 0.06Seconds 273.07Kbytes/sec.
ftp>quit
Refer to section 30.2.5 to read about configurations that disallow TFTP and FTP over WAN.
30.2.12
Restore Via Console Port
Restore configuration via console port by following the HyperTerminal procedure shown next.
Procedures using other serial communications programs should be similar.
Step 1.
Display menu 24.6 and enter "y" at the following screen.
Figure 30-9 System Maintenance: Restore Configuration
Ready to restore Configuration via Xmodem.
Do you want to continue (y/n):
Step 2.
The following screen indicates that the Xmodem download has started.
317517-A Rev 00
Advertisement
Table of Contents
