Table of Contents
Advertisement
Chapter 2
Introducing the WebGUI
This chapter describes how to access the Contivity 221 WebGUI and provides an overview of its
WebGUI Overview
2.1
The embedded WebGUI allows you to manage the Contivity 221 from anywhere through a
browser such as Microsoft Internet Explorer or Netscape Navigator. Use Internet Explorer 6.0 and
later or Netscape Navigator 7.0 and later versions with JavaScript enabled. It is recommended that
you set your screen resolution to 1024 by 768 pixels. The screens you see in the WebGUI may vary
somewhat from the ones shown in this document due to differences between individual Contivity
221 models or firmware versions.
Accessing the Contivity 221 WebGUI
2.2
Step 1.
Make sure your Contivity 221 hardware is properly connected and prepare your
computer/computer network to connect to the Contivity 221 (refer to the Quick Start
Guide).
Step 2.
Launch your web browser.
Type "192.168.1.1" as the URL.
Step 3.
Step 4.
Type "setup" (default) as the password and click Login. In some versions, the default
password appears automatically - if this is the case, click Login.
You should see a screen asking you to change your password (highly recommended)
Step 5.
as shown next. Type a new password (and retype it to confirm) and click Apply or
click Ignore.
Contivity 221 VPN Switch User's Guide
2-1
screens.
Advertisement
Table of Contents
