Edit Ip; Figure 23-5 Menu 11.3: Remote Node Network Layer Options For Ethernet Encapsulation; Table 23-4 Remote Node Network Layer Options Menu Fields - Nortel Contivity 221 User Manual

Hide thumbs Also See for Contivity 221:

Table of Contents

23-8 Remote Node Setup

Table 23-3 Fields in Menu 11.1 (PPTP Encapsulation)

Press [SPACE BAR] and then [ENTER] to select Yes if you want to

make the connection to this remote node a nailed-up connection.

Edit IP

Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes. Press

[ENTER] to open Menu 11.3 - Network Layer Options.

Menu 11.3 - Remote Node Network Layer Options

IP Address Assignment= Dynamic

IP Address= N/A

IP Subnet Mask= N/A

Gateway IP Addr= N/A

Network Address Translation= SUA Only

Private= N/A

RIP Direction= None

Version= N/A

Multicast= None

Enter here to CONFIRM or ESC to CANCEL:

This menu displays the My WAN Addr field for PPPoE and PPTP encapsulations and

Gateway IP Addr field for Ethernet encapsulation. The following table describes the fields in

this screen.

If your ISP did not assign you an explicit IP address, press [SPACE

BAR] and then [ENTER] to select Dynamic; otherwise select Static

and enter the IP address & subnet mask in the following fields.

317517-A Rev 00