Table of Contents
Advertisement
Chart I-1
Sys Commands
save
syslog
updateSvrIP
pwderrtm
rn
accessblock
load
disp
nat
nailup
mtu
save
COMMAND
server [domainName/IP]
subject [mail subject]
active [0:no/1:yes]
display
facility [Local ID(1-7)]
server [domainName/IP]
<minute>
[minute]
<entry no.>
<entry no.>(0:working
buffer)
<none|sua|full_feature>
<no|yes>
<value>
[entry no.]
Command Interpreter I-5
DESCRIPTION
Sets the domain name or IP address
of the mail server to which to send
the logs.
Sets the log e-mail's subject.
Save the log settings from the
buffer.
Enables/disables syslog logging.
Displays the syslog settings.
Specifies the file to which the device
logs the syslog messages.
Specifies the domain name or IP
address of the syslog server to
which to send the syslogs.
Sets how often to resolve the mail
and/or syslog server domain name
to an IP address.
Sets or displays the password error
blocking timeout value.
Blocks access to a remote node.
Loads remote node information.
Displays remote node information.
Configure remote node NAT.
Configure a remote node connection
to be nailed up (always on).
Sets the remote node Maximum
Transmission Unit.
Save remote node information.
Contivity 221 VPN Switch User's Guide
Advertisement
Table of Contents
