Table of Contents
Advertisement
Table 30-3 General Commands for GUI-based TFTP Clients
Local File
Enter the path and name of the firmware file (*.bin extension) or configuration file (*.rom
extension) on your computer.
Remote File
This is the filename on the Contivity 221. The filename for the firmware is "ras" and for
the configuration file, is "rom-0".
Binary
Transfer the file in binary mode.
Abort
Stop transfer of the file.
Refer to section 30.2.5 to read about configurations that disallow TFTP and FTP over WAN.
30.2.9
Backup Via Console Port
Back up configuration via console port by following the HyperTerminal procedure shown next.
Procedures using other serial communications programs should be similar.
Display menu 24.5 and enter "y" at the following screen.
Step 1.
Figure 30-3 System Maintenance: Backup Configuration
Ready to backup Configuration via Xmodem.
Do you want to continue (y/n):
The following screen indicates that the Xmodem download has started.
Step 2.
Figure 30-4 System Maintenance: Starting Xmodem Download Screen
You can enter ctrl-x to terminate operation any time.
Starting XMODEM download...
Run the HyperTerminal program by clicking Transfer, then Receive File as shown in
Step 3.
the following screen.
Firmware and Configuration File Maintenance 30-7
Contivity 221 VPN Switch User's Guide
Advertisement
Table of Contents
