Table of Contents
Advertisement
20-10 WAN and Dial Backup Setup
Editing TCP/IP Options
20.8
Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes. Press
[ENTER] to open Menu 11.3 - Network Layer Options.
Figure 20-6 Menu 11.3: Remote Node Network Layer Options
Menu 11.3 - Remote Node Network Layer Options
IP Address Assignment= Dynamic
Rem IP Addr= 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
Network Address Translation= None
Metric= 15
Private= No
RIP Direction= Both
Version= RIP-2B
Multicast= None
Enter here to CONFIRM or ESC to CANCEL:
The following table describes the fields in this screen.
Table 20-7 Remote Node Network Layer Options Menu Fields
FIELD
IP Address
If your ISP did not assign you an explicit IP address, press [SPACE
Assignment
BAR] and then [ENTER] to select Dynamic; otherwise select Static and
enter the IP address & subnet mask in the following fields.
Rem IP
Leave this field set to 0.0.0.0 to have the ISP or other remote router
Address
dynamically (automatically) send its IP address if you do not know it.
Enter the remote gateway's IP address here if you know it (static).
Rem Subnet
Leave this field set to 0.0.0.0 to have the ISP or other remote router
Mask
dynamically send its subnet mask if you do not know it. Enter the remote
gateway's subnet mask here if you know it (static).
317517-A Rev 00
DESCRIPTION
EXAMPLE
Dynamic
(default)
0.0.0.0
(default)
0.0.0.0
(default)
Advertisement
Table of Contents
