Configuring The Pppoe Client; Figure 22-2 Internet Access Setup (Pptp); Table 22-2 New Fields In Menu 4 (Pptp) Screen - Nortel Contivity 221 User Manual

22-4 Internet Access

Figure 22-2 Internet Access Setup (PPTP)

Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= PPTP
Service Type= N/A
My Login= username
My Password= ******
Retype to Confirm= ******
Idle Timeout= 100
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address=N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel:
The following table contains instructions about the new fields when you choose PPTP in the
Encapsulation field in menu 4.

Table 22-2 New Fields in Menu 4 (PPTP) Screen

FIELD
Encapsulation Press [SPACE BAR] and then press [ENTER] to choose PPTP. The
encapsulation method influences your choices for the IP Address field.
Idle Timeout This value specifies the time, in seconds, that elapses before the
Contivity 221 automatically disconnects from the PPTP server.

Configuring the PPPoE Client

22.4
If you enable PPPoE in menu 4, you will see the next screen. For more information on PPPoE,
please see the Appendix.
317517-A Rev 00
DESCRIPTION EXAMPLE
PPTP
100
(default)