Table of Contents
Advertisement
14-10 Remote Management Screens
Table 14-5 SNMP
LABEL
SNMP
Configuration
Get Community
Enter the Get Community, which is the password for the incoming Get and GetNext
requests from the management station. The default is public and allows all requests.
Set Community
Enter the Set community, which is the password for incoming Set requests from the
management station. The default is public and allows all requests.
Trusted Host
If you enter a trusted host, your Contivity 221 will only respond to SNMP messages
from this address. 0.0.0.0 (default) means your Contivity 221 will respond to all SNMP
messages it receives, regardless of source.
Trap
Community
Type the trap community, which is the password sent with each trap to the SNMP
manager. The default is public and allows all requests.
Destination
Type the IP address of the station to send your SNMP traps to.
SNMP
Service Port
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Service Access
Select the interface(s) through which a computer may access the Contivity 221 using
this service.
Secured Client
A secured client is a "trusted" computer that is allowed to communicate with the
IP Address
Contivity 221 using this service.
Select All to allow any computer to access the Contivity 221 using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the Contivity 221 using this service.
Apply
Click Apply to save your customized settings and exit this screen.
Reset
Click Reset to begin configuring this screen afresh.
Configuring DNS
14.7
Use DNS (Domain Name System) to map a domain name to its corresponding IP address and vice
versa, for example, the IP address of www.nortelnetworks.com is 47.249.48.20. Refer to the
Internet Access chapter for more information.
317517-A Rev 00
DESCRIPTION
Advertisement
Table of Contents
