Table of Contents
Advertisement
Chart L-13 Log Categories and Available Settings
LOG CATEGORIES
mten
upnp
urlblocked
urlforward
Use
to not record logs for that category,
0
alerts for that category, and
Use the sys logs save command to store the settings in the Contivity 221
(you must do this in order to record logs).
Displaying Logs
Use the sys logs display command to show all of the logs in the Contivity
221's log.
Use the sys logs category display command to show the log settings
for all of the log categories.
Use the sys logs display [log category] command to show the logs
in an individual Contivity 221 log category.
Use the sys logs clear command to erase all of the Contivity 221's logs.
Log Command Example
This example shows how to set the Contivity 221 to record the access logs and
alerts and then view the results.
ras> sys logs load
ras> sys logs category access 3
ras> sys logs save
ras> sys logs display access
0, 1
0, 1
0, 1, 2, 3
0, 1
to record only logs for that category,
1
3
to record both logs and alerts for that category.
Log Descriptions L-19
AVAILABLE PARAMETERS
to record only
2
Contivity 221 VPN Switch User's Guide
Advertisement
Table of Contents
