Table of Contents
Advertisement
Chart I-4
IP Commands
stroute
display
load
save
config
tcp
status
tftp
telnet
tracerout
e
udp
status
urlfilter
enable
COMMAND
[rule # | buf]
<rule #>
name <site name>
destination <dest
addr>[/<bits>]
<gateway>
[<metric>]
mask <IP subnet
mask>
gateway <IP
address>
metric <metric #>
private <yes|no>
active <yes|no>
<host>
<host> [ttl]
[wait] [queries]
[0:no/1:yes]
Command Interpreter I-11
DESCRIPTION
Displays the list of static routes or
detailed information on a specified rule.
Load the specified static route rule into
the buffer.
Saves a rule from the buffer to the
System Parameters Table.
Sets the name for a static route.
Sets a static route's destination IP
address and gateway.
Sets a static route's subnet mask.
Sets a static route's gateway IP address.
Sets a static route's metric number.
Turns private mode on or off.
Enables/disables a static route rule.
Displays the TCP statistic counters.
Telnets to the specified host.
Sends ICMP packets to trace the route
of a remote host.
Displays the UDP status.
Enables/disables content filtering.
Contivity 221 VPN Switch User's Guide
Advertisement
Table of Contents
