Table of Contents
Advertisement
Figure 31-7 Menu 24.10 System Maintenance: Time and Date Setting
Menu 24.10 - System Maintenance - Time and Date Setting
Use Time Server when Bootup= NTP (RFC-1305)
Time Server Address= time-b.nist.gov
Current Time:
New Time (hh:mm:ss):
Current Date:
New Date (yyyy-mm-dd):
Time Zone= GMT+0800
Daylight Saving= No
Start Date (mm-dd):
End Date (mm_dd):
The following table describes the fields in this screen.
Table 31-4 Time and Date Setting Fields
FIELD
Use Time Server
Enter the time service protocol that your timeserver sends when you turn on the
when Bootup
Contivity 221. Not all timeservers support all protocols, so you may have to check
with your ISP/network administrator or use trial and error to find a protocol that
works. The main differences between them are the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC-868) format displays a 4-byte integer giving the total number of seconds
since 1970/1/1 at 0:0:0.
NTP (RFC-1305) the default, is similar to Time (RFC-868).
None enter the time manually.
Time Server
Enter the IP address or domain name of your timeserver. Check with your
Address
ISP/network administrator if you are unsure of this information. The default is time-
b.nist.gov
Current Time
This field displays an updated time only when you reenter this menu.
New Time
Enter the new time in hour, minute and second format.
Current Date
This field displays an updated date only when you reenter this menu.
New Date
Enter the new date in year, month and day format.
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
System Maintenance Menus 8 to 10 31-7
00 : 00 : 00
11 : 23 : 16
2000 - 01 - 01
2001 - 03 - 01
01 – 01
01 – 01
Contivity 221 VPN Switch User's Guide
Advertisement
Table of Contents
