Table of Contents
Advertisement
18-4 Introducing the SMT
Figure 18-3 Main Menu
Getting Started
1. General Setup
2. WAN Setup
3. LAN Setup
4. Internet Access Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
15. NAT Setup
The following table describes the fields in this screen.
Table 18-2 Main Menu Summary
NO.
Menu Title
1
General Setup
2
WAN Setup
3
LAN Setup
4
Internet Access Setup
11
Remote Node Setup
12
Static Routing Setup
15
NAT Setup
21
Filter and Firewall Setup
22
SNMP Configuration
23
System Password
317517-A Rev 00
Contivity 221 Main Menu
Advanced Management
21. Filter and Firewall Setup
22. SNMP Configuration
23. System Password
24. System Maintenance
26. Schedule Setup
99. Exit
Enter Menu Selection Number:
Use this menu to set up dynamic DNS and administrative information.
Use this menu to clone a MAC address from a computer on your LAN and
configure the backup WAN dial-up connection.
Use this menu to apply LAN filters, configure LAN DHCP and TCP/IP
settings.
Configure your Internet Access setup (Internet address, gateway IP
address, login, etc.) with this menu.
Use this menu to configure detailed remote node settings (your ISP is
also a remote node) as well as apply WAN filters.
Configure IP static routes in this menu.
Use this menu to configure Network Address Translation.
Configure filters, activate/deactivate the firewall and view the firewall log.
Use this menu to configure SNMP-related parameters.
Change your password in this menu (recommended).
FUNCTION
Advertisement
Table of Contents
