31-6 System Maintenance Menus 8 to 10
Time and Date Setting
31.3
There is a software mechanism to set the time manually or get the current time and date from an
external server when you turn on your Contivity 221. Menu 24.10 allows you to update the time
and date settings of your Contivity 221. The real time is then displayed in the Contivity 221 error
logs and firewall logs.
Select menu 24 in the main menu to open Menu 24 - System Maintenance, as shown next.
Figure 31-6 Menu 24: System Maintenance
Menu 24 - System Maintenance
Enter Menu Selection Number:
Enter 10 to go to Menu 24.10 - System Maintenance - Time and Date Setting to update the
time and date settings of your Contivity 221 as shown in the following screen.
317517-A Rev 00
1.
System Status
2.
System Information and Console Port Speed
3.
Log and Trace
4.
Diagnostic
5.
Backup Configuration
6.
Restore Configuration
7.
Upload Firmware
8.
Command Interpreter Mode
9.
Call Control
10. Time and Date Setting
11. Remote Management Setup