Figure 6-2 Ethernet Encapsulation
The following table describes the fields in this screen.
Table 6-2 Ethernet Encapsulation
LABEL
Encapsulation
You must choose the Ethernet option when the WAN port is used as a regular
Ethernet.
Service Type
Choose from Standard, Telstra (RoadRunner Telstra authentication method), RR-
Manager (Roadrunner Manager authentication method) or RR-Toshiba (Roadrunner
Toshiba authentication method).
The following fields do not appear with the Standard service type.
User Name
Type the user name given to you by your ISP.
Password
Type the password associated with the user name above.
Login Server IP
Type the authentication server IP address here if your ISP gave you one.
Address
Apply
Click Apply to save your changes back to the Contivity 221.
Reset
Click Reset to begin configuring this screen afresh.
6.4.2
PPPoE Encapsulation
The Contivity 221 supports PPPoE (Point-to-Point Protocol over Ethernet). PPPoE is an IETF
Draft standard (RFC 2516) specifying how a personal computer (PC) interacts with a broadband
modem (DSL, cable, wireless, etc.) connection. The PPPoE option is for a dial-up connection
using PPPoE.
DESCRIPTION
Contivity 221 VPN Switch User's Guide
WAN Screens 6-3