Table of Contents
Advertisement
Chapter 5
Setup and Configuration
2.
Select Enabled to enable SNTP, or select Disabled to disable SNTP.
Click Apply.
3.
Section 5.1.2.2
Configuring NTP Servers
To configure either the primary or backup NTP server, do the following:
Navigate to Administration » System Time Manager » Configure NTP » Configure NTP Servers . The NTP
1.
Servers table appears.
Figure 58: NTP Servers Table
2.
Select either Primary or Backup. The NTP Servers form appears.
4
Figure 59: NTP Servers Form
1. Server Box 2. IP Address Box 3. Update Period Box 4. Apply Button 5. Reload Button
3.
Configure the following parameter(s) as required:
Parameter
Server
112
Description
Synopsis: Any 8 characters
RUGGEDCOM ROS
User Guide
1
2
3
5
Configuring NTP Servers
Advertisement
Table of Contents
