Chapter 3
Device Management
•
Section 3.6.4.3, "Adding a Remote Syslog Server"
•
Section 3.6.4.4, "Deleting a Remote Syslog Server"
Section 3.6.4.1
Configuring the Remote Syslog Client
To configure the remote syslog client, do the following:
Navigate to Administration » Configure Syslog » Configure Remote Syslog Client . The Remote Syslog
1.
Client form appears.
2
Figure 14: Remote Syslog Client Form
1. UDP Port 2. Apply Button 3. Reload Button
2.
Configure the following parameter(s) as required:
Parameter
UDP Port
3.
Click Apply.
Section 3.6.4.2
Viewing a List of Remote Syslog Servers
To view a list of known remote syslog servers, navigate to Administration » Configure Syslog » Configure
Remote Syslog Server . The Remote Syslog Server table appears.
62
Description
Synopsis: 1025 to 65535 or { 514 }
Default: 514
The local UDP port through which the client sends information to
the server(s).
Configuring the Remote Syslog Client
RUGGEDCOM ROS
User Guide
1
3