RUGGEDCOM ROS
User Guide
Device Management
This chapter describes how to configure and manage the device and its components, such as module interfaces,
logs and files.
NOTE
For information about how to configure the device to work with a network, refer to
and Configuration
CONTENTS
•
Section 3.1, "Viewing Product Information"
•
Section 3.2, "Viewing CPU Diagnostics"
•
Section 3.3, "Restoring Factory Defaults"
•
Section 3.4, "Configuring an IP Interface"
•
Section 3.5, "Uploading/Downloading Files"
•
Section 3.6, "Managing Logs"
•
Section 3.7, "Managing IP Gateways"
•
Section 3.8, "Configuring IP Services"
•
Section 3.9, "Managing Remote Monitoring"
•
Section 3.10, "Upgrading/Downgrading Firmware"
•
Section 3.11, "Resetting the Device"
•
Section 3.12, "Decommissioning the Device"
Section 3.1
Viewing Product Information
During troubleshooting or when ordering new devices, Siemens personnel may request specific information about
the device, such as the model, order code or serial number.
To view information about the device, navigate to Diagnostics » View Product Information . The Product
Information form appears.
Viewing Product Information
.
Chapter 3
Device Management
Chapter 5, Setup
51