Table of Contents
Advertisement
Chapter 5
Setup and Configuration
Figure 97: Mirrored Bits Table
3.
Select a serial port. The Mirrored Bits form appears.
7
Figure 98: Mirrored Bits Form
1. Port Box 2. Transport Box 3. Loc Port Box 4. Rem Port Box 5. IP Address Box 6. Link Stats Options 7. Apply Button
8. Reload Button
4.
Configure the following parameter(s) as required:
Parameter
Port
Transport
Loc Port
Rem Port
158
Description
Synopsis: 1 to 4
Default: 1
The port number as seen on the front plate silkscreen of the
switch.
Synopsis: { TCP, UDP }
Default: UDP
The network transport used to transport Mirrored Bits protocol
data over an IP network.
Synopsis: 1 to 65535
Default: 61001
The local IP port to use when listening for an incoming connection
or UDP data.
Synopsis: 1 to 65535
Default: 61000
The remote TCP port to use when placing an outgoing
connection.
Configuring the Mirrored Bits Protocol
RUGGEDCOM ROS
User Guide
1
2
3
4
5
6
8
Advertisement
Table of Contents
