Table of Contents
Advertisement
RUGGEDCOM ROS
User Guide
This table displays the following information:
Parameter
Port
Protocol
Rx Chars
Tx Chars
Rx Packets
Tx Packets
Packet Errors
Parity Errors
Framing Errors
Overrun Errors
Section 5.4.22
Clearing Statistics for Specific Serial Ports
To clear the statistics collected for one or more serial ports, do the following:
1.
Navigate to Serial Protocols » Clear Serial Port Statistics . The Clear Serial Port Statistics form appears.
2
Figure 115: Clear Serial Port Statistics Form
1. Port Check Boxes 2. Confirm Button
2.
Select one or more serial ports.
Clearing Statistics for Specific Serial Ports
Description
Synopsis: 1 to maximum port number
The port number as seen on the front plate silkscreen of the switch.
Synopsis: Any 15 characters
The serial protocol supported on this serial port.
Synopsis: 0 to 4294967295
The number of received characters.
Synopsis: 0 to 4294967295
The number of transmitted characters.
Synopsis: 0 to 4294967295
The number of received packets.
Synopsis: 0 to 4294967295
The number of transmitted packets.
Synopsis: 0 to 4294967295
The number of packets received from this port and discarded (error
in protocol, CRC or routing information not found).
Synopsis: 0 to 4294967295
The number of Parity Errors.
Synopsis: 0 to 4294967295
The number of Framing Errors.
Synopsis: 0 to 4294967295
The number of Overrun Errors.
Chapter 5
Setup and Configuration
1
171
Advertisement
Table of Contents
