Table of Contents
Advertisement
RUGGEDCOM ROS
User Guide
Parameter
Name
4.
Click Apply.
Section 5.4.17.3
Deleting a Device Address
To delete a device address, do the following:
1.
Navigate to Serial Protocols » Configure Device Address Table . The Device Address Table table appears.
Figure 109: Device Address Table Table
2.
Select the device address from the table. The Device Address Table form appears.
Deleting a Device Address
Description
The serial port to which a device is attached. If the device with
this address is attached to the serial port of a remote host, the
value of this parameter is 'Unknown'.
Synopsis: Any 16 characters
Default:
The addressed device name.
Chapter 5
Setup and Configuration
167
Advertisement
Table of Contents
