Table of Contents
Advertisement
RUGGEDCOM ROS
User Guide
•
Section 3.9.3, "Managing RMON Events"
Section 3.9.1
Managing RMON History Controls
The history controls for Remote Monitoring take samples of the RMON-MIB history statistics of an Ethernet port at
regular intervals.
CONTENTS
•
Section 3.9.1.1, "Viewing a List of RMON History Controls"
•
Section 3.9.1.2, "Adding an RMON History Control"
•
Section 3.9.1.3, "Deleting an RMON History Control"
Section 3.9.1.1
Viewing a List of RMON History Controls
To view a list of RMON history controls, navigate to Ethernet Stats » Configure RMON History Controls . The
RMON History Controls table appears.
Figure 26: RMON History Controls Table
If history controls have not been configured, add controls as needed. For more information, refer to
Section 3.9.1.2, "Adding an RMON History Control"
Section 3.9.1.2
Adding an RMON History Control
To add an RMON history control, do the following:
Navigate to Ethernet Stats » Configure RMON History Controls . The RMON History Controls table
1.
appears.
Managing RMON History Controls
.
Chapter 3
Device Management
71
Advertisement
Table of Contents
