Table of Contents
Advertisement
Chapter 3
Device Management
9
Figure 7: Product Information Form (Example)
1. MAC Address Box 2. Order Code Box 3. Classification Box 4. Serial Number Box 5. Boot Version Box 6. Main Version Box
7. Required Boot Box 8. Hardware ID Box 9. Reload Button
This screen displays the following information:
Parameter
MAC Address
Order Code
Classification
Serial Number
Boot Version
Main Version
Required Boot
Hardware ID
52
Description
Synopsis: ##-##-##-##-##-## where ## ranges 0 to FF
Shows the unique MAC address of the device.
Synopsis: Any 57 characters
Shows the order code of the device.
Synopsis: Any 15 characters
Provides system classification.
The value Controlled indicates the main firmware is a Controlled
release. The value Non-Controlled indicates the main firmware is a
Non-Controlled release. The Controlled main firmware can run on
Controlled units, but it can not run on Non-Controlled units. The
Non-Controlled main firmware can run on both Controlled and Non-
Controlled units.
Synopsis: Any 31 characters
Shows the serial number of the device.
Synopsis: Any 47 characters
Shows the version and the build date of the boot loader software.
Synopsis: Any 47 characters
Shows the version and build date of the main operating system
software.
Synopsis: Any 15 characters
Shows the minimum boot software loader version required by
running main.
Synopsis: { RSMCPU (40-00-0008 Rev B1), RSMCPU2 (40-00-0026
Rev A1), RS400 (40-00-0010 Rev B2), RMC30, RS900 (40-00-0025
Rev B1), RS900 (40-00-0032 Rev B1), RS1600M, RS400 (40-00-0010
RUGGEDCOM ROS
User Guide
1
2
3
4
5
6
7
8
Viewing Product Information
Advertisement
Table of Contents
